Beurer Foot Massager FB 35

For foot care at home

Gentle vibration massage

Infrared light dots

Removable foot massage roller attachment

3 pedicure accessories with practical hanger

Footrest suitable for massage

It can be used for dry massage

Removable splash guard

Non-slip rubber feet

Wire winding guides

approx. 120 watts

3 settings functions:

Vibration massage

Bubble massage

Water heating

How to use

Start running

• Remove the packaging

• Check the device, power supplies, and cables for damage

• Before connecting the foot bath, fill it with warm water no more than the level indicator shown (about 5-6 cm). However, the footstool should be completely covered with water.

• Now connect the device to the power source

• Route the cable safely so that there is no risk of anyone tripping over it

• Place the foot bath on a firm, flat surface. Rest on a chair, place your feet on the footstool, and press gently. Never stand in a foot bath. Non-slip rubber feet at the base of the unit, turn on the foot bath by pressing the button and set the desired function:

Vibration massage: Press the massage button (2) to turn on the vibration massage. The foot bath begins to vibrate. Place the soles of your feet on the massage heads, increasing or decreasing the pressure to get the desired massage effect.

Bubble Massage: Press the bubble button (3) to feed air into the bubble bar for soothing bubble massage.

Timer: You can set the desired time (20-60 minutes) with the timer function, press the timer button (4) to extend the time another 10 minutes. The factory setting for the timer is 20 minutes. The foot bath turns off automatically once the set time is up. The maximum duration is 60 minutes.

Leave the foot bath to cool for at least 15 minutes before using it again.

Temperature: The screen displays the current water temperature. To change the temperature press and hold the temperature button (5) to select the desired water temperature (35, 38, 42, 45, 48°C). The most pleasant temperature is in the range of 35-42°C, the maximum temperature is 48°C, the factory setting temperature is 35°C,

Magnetic field and infrared: The foot bath has 6 magnets and 8 infrared lights built into the bath, which promote blood circulation.

Massage Roller: You can experience the special massage effect by moving your feet back and forth on the 6 massage rollers built in the bottom of the foot bath, you can choose to remove the massage rollers by pulling them up forcefully,

Removable accessories: Place the desired accessory on the stand in the center, gently press the accessory down with your feet to activate the electric motor,

Brush attachment: It can be used to stimulate parts of the soles of the foot, the massage attachment provides a soothing massage and promotes blood circulation, and the dead skin remover is used to remove dead skin cells and tissue.

Warnings and Precautions:

The unit has been designed for home/private use only, not for commercial use. • This appliance can be used by children over the age of 8 years and persons with reduced physical or sensory skills, or lack of experience or knowledge, provided they have been given supervision or instruction concerning use of the appliance safely and are fully aware of the hazards. consequences of using it. • Children should not play with the device. • User cleaning and maintenance procedures should not be performed by children unless supervised. • If the mains connection cable to this equipment is damaged, the cable must be discarded. If it cannot be removed, the device must be discarded. • If water leaks from the device, the device must not be used after that. • The device has a hot surface, therefore people sensitive to heat should be careful when using the device.

• Turn off the appliance and unplug the power cord after each use and before each cleaning

• Keep the device away from extreme temperatures

• Never stand in a foot bath

Do not place your feet or other objects on top of the filled footbath, as the weight may cause the footbath to tip over and spill water.

The device must not be connected to the power source while it is being filled with water,

• Always turn off the foot bath and unplug it from the mains plug before moving it or cleaning it.